> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://help.getplanks.co.uk/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Why we don’t offer planks below 18mm thickness

We often get asked whether we can cut planks thinner than 18mm. While we understand the need for slimmer timber, we’ve chosen not to offer anything below 18mm. Here’s why:

### 1. **We Prioritise Strength and Stability**
Planks thinner than 18mm are far more prone to:
* **Warping or cupping** (especially with changes in humidity)
* **Cracking or splitting** during cutting, sanding, or use
* Becoming **unusable** during transit or installation
We want to make sure you receive timber that will last — and perform well in your project.

### 2. **Our machinery is calibrated for quality, not minimum thickness**
Our workshop is set up to produce **high-quality, smooth, planed timber**. We work to tight tolerances, but dropping below 18mm would mean:
* A recalibration of our machinery
* A higher risk of damage during processing
* Extra material waste that compromises sustainability

### 3. **What If You Really Need a Slimmer Piece?**
If your project requires timber that appears thinner (e.g. for visual reasons or panel cladding), a few workarounds might help:
* **Rebate or rout the plank** from the back for a thinner edge profile
* **Use veneer or laminate** for ultra-slim surfaces
* Speak to a joiner about modifying a 18mm plank if you're confident in your setup
We’re always happy to advise — just drop us a message and let us know what you’re working on.